Table of Contents
Advertisement
2. Remove the Top Case.
3. Push in SLIDE CAM by Eject Pin(JSJ0484) or minus screw driver
(small) to eject tray slightly.
4. Push out Tray by Eject Pin (JZS0484) or minus screw driver
(small).
7.2. (VHS) Removing Cassette Tape manually
When the cassette tape could not be uninstalled from an electrical malfunction, there are 2 ways
to remove a cassette tape.
7.2.1. (VHS) Removal by compulsory unloading.
If Service Mode can be activated when the power can not be turned on, this operation is able.
1. Press [STOP] and [EJECT] button simultaneously for more than 3
seconds and set the Service Mode to 7.
2. Press [STOP] button in order to unload the mechanism. (Pay
attention to tape slack)
Service Mode Display:
7 ** ** (STOP)
7.2.2. (VHS) Removal by manual operation by rotating the Loading Motor with
7 0L ** (EJECT)
15
Advertisement
Table of Contents
