Table of Contents
Advertisement
Item
Mode name
Description
Initialize Service
Last Drive Error, Error history
and Error Codes stored on the
unit are initialized to factory
setting.
Finishing service
Release Service Mode.
mode
8.2. (VHS) Self-Diagnosis and Special Mode Setting
8.2.1. (VHS) Self-Diagnosis Functions
This model has a self-diagnosis and display function. If the VHS section detects trouble during installation or during use, one of the
following Error Codes will automatically appear in the display on VHS side. Error Codes are displayed in the form of a single English letter
followed by two numbers, as for example "H01".
Note:
1. The indication "U" is displayed on the FIP while power remains on.
2. The indication "H" or "F" is displayed on the FIP, and the power is automatically turned off. When
the power is turned on again, the Error indication code will disappear and the unit will return to
normal display mode (either clock or counter is displayed).
3. This Error indication code will be stored in the microprocessor even after the AC plug being
disconnected.
The two-digit number portion of the stored Error indication code can be re-displayed in "second"
display portion (the last 2 digits of the FIP) by placing the unit is Service Mode Number 3 When
FL display
(Remote controller key)
Press [9] [9] in service
mode.
Display in STOP (E-E)
Press power button on
mode.
the front panel or Remote
controller in service mode.
Key operation
Advertisement
Table of Contents
