Accessory Board Slots; Agp Slot - HP Vectra VL800 Technical Reference Manual

Five 32-bit 33 MHz PCI slots
NOTE
3 System Board

Accessory Board Slots

Accessory Board Slots
The following block diagram shows the position of the accessory board slots
on the system board.
One 1.5V AGP slot.

AGP Slot

Minitower models of the HP Vectra VL800 are equipped with a single AGP
(Accelerated Graphics Port) graphics slot.
The 1.5V AGP slot provides the ultimate graphics performance for high-
end graphics cards, combining AGP 4X bandwidth (with data transfer rates
up to 1056 MB/s).
AGP 3.3V graphics cards cannot be used
The 1.5V AGP slot is backwards compatible with both AGP 1x and 2x modes
(using 1.5 V signalling), and AGP 4x mode (where 1.5 V signalling is
required).
The AGP interface and bus are explained on
48
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4
PCI Slot 5
.
page 54.