Installing Accessory Boards; Accessory Board Slots - HP Vectra Vli 8SF Supplementary Manual

NOTE
Physical Slot 1
Physical Slot 2
Physical Slot 3
CAUTION
2 How to Install or Replace Accessories In Your PC

Installing Accessory Boards

Installing Accessory Boards

Accessory Board Slots

The PC has two accessory board slots.
Only use XT format accessory boards (width less than 10.4 cm or 4.09
inches) that are less than 17.6 cm (6.9-inches) in length.
Accessory Board Connectors
PCI slot #2 (the top slot) can be used for a standard length (less than
•
17.6 cm or 6.9-inches long) XT format 32-bit PCI board.
PCI slot #3 can be used for a standard length (less than 17.6 cm or
•
6.9-inches long) XT format 32-bit PCI board, or
ISA slot #1 can be used for a half-length XT format 16-bit ISA board.
•
When installing an accessory board in physical slot 3, ensure you do not bend
the accessory board slot's connector pins.
To avoid this, partly remove the system board before installing the
accessory board.
54
PCI Slot # 2
PCI Slot # 3 (combo)
ISA Slot # 1 (combo)