System Board Switches - HP Vectra VL800 User Manual

System Board Switches

There are ten system board switches used for configuration, numbered
from 1 to 10. Of these a certain number are reserved and should not be
modified, otherwise it could lead to a system failure.
Switch
1-5
6
7
8
9
10
2 Installing and Replacing Hardware Parts in Your PC
Default Position To Configure:
OFF Reserved. Do Not change Default Settings
ON Enables keyboard power-on.
OFF disables this option.
OFF Enables normal modes.
ON enables the BIOS recovery mode at next boot.
OFF Retains CMOS memory.
ON clears CMOS memory at next boot.
OFF Enables User and System Administrator passwords.
ON clears the passwords at next boot.
OFF
System Board Switches
Location of system
board switches
55