HP Vectra VL800 User Manual page 20

1 Setting Up and Using Your PC
Using the HP Setup Program
Security Menu
Sub-menus are presented for changing the characteristics and values of the
System Administrator Password, User Password, Power-on Password, Fixed
Disk Boot Sector and for preventing unauthorized start-up from the Floppy,
CD-ROM and IDE-HDD drives (refer to "Setting Passwords in the HP Setup
Program" on page 21).
Boot Menu
Select the order of the devices from which you want the BIOS to attempt to
boot the operating system. The QuickBoot mode option allows the system
to skip certain tests while booting. This decreases the time needed to boot
the system.
Power Menu
The Network Interface option enables the system to return to normal speed
when a specific command is received by the network interface.
Setup changes system behavior by modifying the power-on initialization
parameters. Setting incorrect values may cause system boot failure. Should
this occur, press F9 to load the Setup default values to recover.
20