Replacing The System Board - HP Vectra VL800 User Manual

2 Installing and Replacing Hardware Parts in Your PC

Replacing the System Board

Replacing the System Board
Removing the System Board
1 Switch off the display and PC. Disconnect all power cables and any LAN
or telecommunications cables.
2 Remove the PC's cover (refer to page 25).
3 Lay the minitower on its
side.
4 Disconnect all cables
attached to the system
board.
5 Remove the main memory, processor, heatsink and any accessory cards
from the old system board (described in this chapter).
6 Remove the screws securing the system board in place
7 Lift the system board out, being careful not to damage the PC's rear
connectors.
52
.