In The Minitower - HP Vectra VL600 User Manual

CAUTION
4 Align the new hard drive in the tray (with the correct orientation)
and tighten the screws.
5 Attach the data and power connectors.
6 Replace the cover (described in this chapter).

In the Minitower

1 Remove the computer's cover (described in this chapter).
2 Lay the minitower on its side.
3 Remove the connectors from both the hard drive and the floppy
drive.
hard drive
4 Press the retaining clip on top of the drive tray and slide the drive
tray out.
Hold tray firmly while removing it.
3 Replacing and Upgrading PC Components
Replacing the Hard Disk Drive
floppy drive
49