Installing A Master Pass Key Lock - HP Vectra VL600 User Manual

Installing a Master Pass Key Lock

1 Remove the computer's cover (described in this chapter).
2 Push out the metal filler disc on the PC's back panel.
Desktop
3 In a desktop: remove the lock from the adapter and insert the lock
in the hole (with the key in the lock).
4 In a minitower:
a Remove the screw situated in the top casing of the PC, just behind the
power supply (see above).
b Insert the lock in the hole (with the key in the lock). Make sure
that the pin on the bottom of the lockis engaged in the hole in the
side panel locking mechanism.
Minitower
locking mechanism
3 Replacing and Upgrading PC Components
Installing a Master Pass Key Lock
Minitower
63