Table of Contents
Advertisement
Hardware Upgrades
Using the Small Form Factor Computer in a
Minitower Configuration
The Small Form Factor computer can be used in either a minitower or desktop
configuration. To use it in the minitower configuration, you must purchase a tower
stand from HP (part number 316593-001).
If the computer is in the desktop configuration, ensure at least 4 inches (10.2 cm) of
space on all sides of the computer remains clear and free of obstructions.
To install the tower stand:
1. Align the hole at the base of the computer with the post and thumbscrew in the
stand 12.
2. Tighten the screw to secure the computer to the stand 3. This adds stability and
helps to ensure proper airflow to the internal components.
2-2
Hardware Reference Guide
Advertisement
Table of Contents
