4.1 The screen change and function by switch operation
This product changes various screens by switch operation. Here, the change step of the screen by switch operation is
explained.
Instant measurement display
(General display)
MAX/MIN
It displays the
Changes a
factor of the
screen with the
maximum and the
main monitor
minimum
factor of instant
measurement on
measurement.
display on the
main monitor.
Maximum / Minimum
measurement display
IM 77C01E31-01EN
RESET/SHIFT
Push
1 second
+
MAX/MIN
+
RESET/SHIFT
Push 1 second
Conditions:
At manual reset setting
Alarm reset
(Output and display)
Conditions:
Displaying the factor
applicable to the
main monitor.
Maximum / Minimum
reset
(Main monitor
display factor)
Maximum / Minimum
reset
(All factor)
13
Wh, varh factor display
SET
Electric-energy
integrated-value
enlarged display
No operation,
10 minutes
A, DA, MDA, V factor display.
At 1φ2W, With no function.
DISPLAY
Phase (line) display
change
DISPLAY
Push 3 seconds or
No operation, 10 minutes.
,
+
-
Main monitor
display-element
change
DISPLAY
Push 3 seconds or
No operation, 10 minutes.
RESET/SHIFT
+
-
Setting point check
DISPLAY
Or No operation, 10 minutes.
SET
Push 3 seconds
Setting mode 1
DISPLAY
Or No operation, 10 minutes.
SET
+
RESET/SHIFT
Push 3 seconds
Setting mode 2
DISPLAY
Or No operation, 10 minutes.
SET
+
DISPLAY
Push 3 seconds
Setting mode 3
DISPLAY
Or No operation, 10 minutes.
SET
+
MODE
Push 3 seconds
TEST mode
DISPLAY
SFLC-212-181
13