HP Vectra VEi7 Supplementary Manual page 56

2 How to Install and Upgrade Accessories In Your PC
Upgrading Mass Storage Devices
3 Slide the drive in through the front of the PC and attach all the
screws provided with the device.
4 Attach all connectors. There may also be a CD or DVD audio cable.
Illustrations on page 60 show where to connect the audio cable to the
system board on your PC.
Audio
connector
(optional)
5 Replace the floppy/hard disk drive tray if you removed it earlier.
6 Replace the PC's front panel and cover (described in this chapter).
56
Optional third
screw