Download  Print this page

HP 3COM Etherlink III 3C590 PCI 10BT Installation Manual

Hewlett-packard pci 10bt network adapter installation guide.
Hide thumbs

Advertisement

3COM Etherlink III 3C590 PCI 10BT
Network Adapter
Installation Guide

Advertisement

Table of Contents

   Related Manuals for HP 3COM Etherlink III 3C590 PCI 10BT

   Summary of Contents for HP 3COM Etherlink III 3C590 PCI 10BT

  • Page 1 3COM Etherlink III 3C590 PCI 10BT Network Adapter Installation Guide...
  • Page 2 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 3 General information to read before installing General information to read before installing On all systems : efore installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
  • Page 4 General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
  • Page 5 Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media.
  • Page 6 1 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer.
  • Page 7 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media.
  • Page 8 2 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on “OK” when the system prompts for the computer and workgroup names. 9 Enter the Computer Name, Workgroup, and Computer Description in the appropriate spaces and click on “Close” (Contact your network administrator if you do not have the required information).
  • Page 9 Connecting to a Netware Requirements 3.12 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows 95 SR2.5 media.
  • Page 10 3 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer.
  • Page 11 Connecting to a Netware Requirements 4.11 Server • HP Vectra with Windows 95 SR2.5. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22. • Microsoft Windows 95 SR2.5 media.
  • Page 12 4 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 7 During the Update Device Driver process, point to the appropriate file locations (i.e. drivers disk or Windows 95 CD) to install the necessary files. Keep newer files when a file being copied is older than the file currently on your computer.
  • Page 13 Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
  • Page 14 5 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Insert the 3COM 3C590 driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)”...
  • Page 15 Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
  • Page 16 6 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)” and click on “OK”.
  • Page 17 Requirements NetWare 3.12 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
  • Page 18 7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Insert the 3COM driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)”...
  • Page 19 7 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Novell NetWare 3.12 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft Power Down application once the...
  • Page 20 Requirements NetWare 4.11 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 4.0 Workstation media.
  • Page 21 8 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Insert the 3COM driver disk into the floppy drive. 9 Set the path to “A:\NDIS\WINNT35\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “3Com EtherLink III PCI Bus-Master Adapter (3C590)”...
  • Page 22 8 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft Power Down application once the...
  • Page 23 Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media.
  • Page 24 9 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window.
  • Page 25 Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media.
  • Page 26 10 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window.
  • Page 27 Connecting to a Novell Requirements NetWare 4.11 Server • HP Vectra with Windows NT3.51 Workstation. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.SYS, version 1.22 • Microsoft Windows NT 3.51 Workstation media.
  • Page 28 11 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window.
  • Page 29 Requirements Windows NT 4.0 Server • HP Vectra with MS-DOS and MS-Windows for Workgroups 3.11 • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.386, version 1.18 • Microsoft Windows for Workgroups 3.11 media.
  • Page 30 12 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 9 Select “3COM Fast EtherLink/EtherLink III Bus Master Adapter (3C59X)” in the “Unlisted or Updated Network Adapter” dialog box, and click “OK”. 10 Make sure that the “3COM Fast EtherLink/EtherLink III Bus Master Adapter (3C59X)”...
  • Page 31 Requirements NetWare 4.11 Server • HP Vectra with DOS and MS-Windows for Workgroups 3.11. • 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2. • Driver File: EL59X.386, version 1.18 • Microsoft Windows for Workgroups 3.11 media.
  • Page 32 13 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter 9 Accept the default network board settings and press “F10” to save it. 10 Select option 6 “Highlight here and press <Enter> to install” and press “Enter” to begin installation.

This manual is also suitable for:

Vectra vei7Vectra vei8Vli8 - vectra

Comments to this Manuals

Symbols: 0
Latest comments: