Managing Contacts; Registering Or Editing Contacts - Epson WorkForce WF-2840 Series User Manual

Preparing the Printer
Placing an ID Card for Copying
Place an ID card 5 mm away from the corner mark of the scanner glass.

Managing Contacts

Registering a contacts list allows you to easily enter destinations. You can register up to 100 entries, and you can
use the contacts list when you enter a fax number.

Registering or Editing Contacts

1. Select Settings on the home screen.
To select an item, use the
2. Select Contacts Manager.
3. Do one of the following.
❏ To register a new contact, select Add Entry, and then select the registry number.
❏ To edit a contact, select Edit, and then select the target contact .
❏ To delete a contact, select Delete, select the target contact, and then select Yes. No further steps are
necessary.
4. Make the necessary settings.
Note:
When entering a fax number, enter an external access code at the beginning of the fax number if your phone system is
PBX and you need the access code to get an outside line. If the access code has been set in the Line Type setting, enter a
hash (#) instead of the actual access code. To add a pause (pause for three seconds) during dialing, press the
to enter a hyphen (-).
5. Select Add Entry to complete registering or editing.
Related Information
"Entering Characters" on page 18
&
> >
Managing Contacts Registering or Editing Contacts
u d l r
buttons, and then press the OK button.
56
d
button