Epson WorkForce WF-2840 Series User Manual page 120

Scanning
>
Scanning Using the Control Panel
3. Select To WSD.
4. Select a computer.
5. Press the
x
button.
Related Information
"Placing Originals" on page 51
&
Setting Up a WSD Port
This section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
The following is necessary to set up a WSD port.
❏ The printer and the computer are connected to the network.
❏ The printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
Click Uninstall and start again if the Uninstall screen is displayed.
>
Scanning Using WSD
120