Ftp - ZyXEL Communications NWA50AX User Manual

SSH Example 2: Test
Fig ure 95
$ telnet 192.168.1.2 22
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.
SSH-1.5-1.0.0
2
Enter "ssh –2 192.168.1.2". This command forces your computer to connect to the Zyxel Device
using SSH version 1. If this is the first time you are connecting to the Zyxel Device using SSH, a message
displays prompting you to save the host information of the Zyxel Device. Type "yes" and press [ENTER].
Then enter the password to log in to the Zyxel Device.
SSH Example 2: Log in
Fig ure 96
$ ssh –2 192.168.1.2
The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts.
Administrator@192.168.1.2's password:
3
The CLI screen displays next.
16.6 FT P
You can upload and download the Zyxel Device's firmware and configuration files using FTP. To use this
feature, your computer must have an FTP client. See
about firmware and configuration files.
To change your Zyxel Device's FTP settings, click
as shown. Use this screen to specify FTP settings.
Configuration > System > FTP
Fig ure 97
Chapter 16 System
Chapter 18 on page 167
C o nfig ura tio n > Syste m > FT P
NWA50AX User's Guide
155
for more information
tab. The screen appears