Table of Contents
Advertisement
17.1 Overview
Configuration files define the Zyxel Device's settings. Shell scripts are files of commands that you can
store on the Zyxel Device and run when you need them. You can apply a configuration file or run a shell
script without the Zyxel Device restarting. You can store multiple configuration files and shell script files
on the Zyxel Device. You can edit configuration files or shell scripts in a text editor and upload them to
the Zyxel Device. Configuration files use a .conf extension and shell scripts use a .zysh extension.
17.1.1 What You Can Do in this Chapter
• The Configuration File screen
can also download and upload configuration files.
• The Firmware Package screen
uploads firmware to the Zyxel Device.
• The Shell Script screen
script files.
17.1.2 What you Need to Know
The following terms and concepts may help as you read this chapter.
Configuration Files and Shell Scripts
When you apply a configuration file, the Zyxel Device uses the factory default settings for any features
that the configuration file does not include. When you run a shell script, the Zyxel Device only applies the
commands that it contains. Other settings do not change.
These files have the same syntax, which is also identical to the way you run CLI commands manually. An
example is shown below.
Figure 116 Configuration File / Shell Script: Example
# enter configuration mode
configure terminal
# change administrator password
username admin password 4321 user-type admin
#configure default radio profile, change 2GHz channel to 11 & Tx output
power # to 50%
wlan-radio-profile default
2g-channel 11
output-power 50%
exit
write
(Section 17.2 on page
(Section 17.3 on page
(Section 17.4 on page
NWA50AX/NWA90AX/NWA55AXE Series User's Guide
C
H A P T E R
File Manager
178) stores and names configuration files. You
183) checks your current firmware version and
185) stores, names, downloads, uploads and runs shell
177
17
Advertisement
Table of Contents
Troubleshooting
