How Ssh Works - ZyXEL Communications NWA90AX User Manual

15.5.1 How SSH Works

The following figure is an example of how a secure connection is established between two remote hosts
using SSH v1.
Figure 105 How SSH v1 Works Example
Host Identification
1
The SSH client sends a connection request to the SSH server. The server identifies itself with a host key.
The client encrypts a randomly generated session key with the host key and server key and sends the
result back to the server.
The client automatically saves any new server public keys. In subsequent connections, the server
public key is checked against the saved version on the client computer.
Encryption Method
2
Once the identification is verified, both the client and server must agree on the type of encryption
method to use.
Authentication and Data Transmission
3
After the identification is verified and data encryption activated, a secure tunnel is established
between the client and the server. The client then sends its authentication information (user name
and password) to the server to log in to the server.
Chapter 15 System
NWA50AX/NWA90AX/NWA55AXE Series User's Guide
160