Qilive Q.6252 User Manual page 16

Warning!
EN
If the refrigerator is installed in the moisture place, make sure to check whether
the ground wire and leakage circuit breaker are normal. If vibration noises
are produced due to the refrigerator contacting the wall or if the wall gets
blackened by air convection around the compressor, move the refrigerator
away from the wall. Setting up the refrigerator may cause jamming noise
or image chaos to the mobile phone, fixed-line t
television set surrounding it, so try to keep the re
possible in such case.
5.2 Function setting
When the refrigerator system is connected to power supply for
the first time, all icons on the display panel gets illuminated for
2s. When all the doors are closed, the display gets extinguished
automatically if no key operation within 3 minutes. When the
display is off, it will light up if any door is opened or any key
is pressed.
The following key operations are valid only when the keys are
unlocked and gets illuminated on the display.
5.2.1 Temperature setting
The recommended setting of temperatures in each
compartment for optimum food preservation.
5.2.1.1 Fridge temperature setting
Press the 'Fridge' button, with the fridge temperature digits flickering, and then press
the 'Fridge' key to adjust the temperature, finally press the OK to validate the above
temperature setting.
The fridge temperature setting cycles as following:
5°C→6°C→7°C→8°C→OFF→2°C→3°C→4°C→5°C;
OFF refers to Fridge Off, and when OFF takes effect, the fridge will stop cooling.
Warning!
Take foods out of the fridge compartment
before setting this function.
5.2.1.2 Freezer temperature setting
Press the 'Freezer' button, with the freezer temperature digits flickering, and then press
the 'Freezer' key to adjust the temperature, finally press the OK to validate the above
temperature setting.
The freezer temperature setting cycles as following:
-18°C→-17°C→-16°C→-24°C→-23°C→-22°C→-21°C→-20°C→-19°C→-18°C;
5.2.1.3 Fast cooling mode
When the fast cooling function is enabled, the fridge temperature will be set at 2°C,
with the compartment temperature reduced rapidly, so that foods can be kept in fresh
condition with their nutrition not lost.
Warning!
Under the 'Fast Cooling' mode, the compartment temperature is subjected to
no change.
Enabling the Fast-Cooling function
• Press the Function key to select Fast Cooling until the corresponding icon gets
16