Out-Of-Range Alerts; Feature Availability - Cisco 7925G User Manual

Out-of-Range Alerts

Icon
Out-of-Range Alerts
Your system administrator can configure your phone to send you an audible alert (beep) when you are out of
range of the wireless network. When you hear the alert, the
When you are out of range of the wireless network, you cannot use the phone for features requiring a wireless
network connection, such as making and receiving calls.
If your system administrator enabled the out-of-range alert, depending on the configuration, you might hear
a beep only once, or every 10, 30, or 60 seconds until you are back within range of the wireless network.
To reconnect to the wireless network after you hear the alert, move to another location until you see the signal
icon

Feature Availability

The operation of your Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G and the features
available to you may vary, depending on the call processing agent used by your company and also on how
your company's phone support team has configured your phone system. Therefore, some of the features
included in this guide might not be available to you or might work differently on your phone system. Contact
your support desk or system administrator for information about feature operation or availability.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
14
Line or call state
BLF indicator is
unavailable for this
line
Remote line in use
Call on hold
Call forward enabled
Authenticated call
Encrypted call
Idle Intercom line
One-way Intercom
call
Two-way Intercom
call
on the phone screen again.
Features of Your Cisco Unified Wireless IP Phone
Description
See Line State (BLF).
A shared line is in use remotely. See
You have put this call on hold. See
You have forwarded your primary line. See
See Suspicious Call Trace.
See Suspicious Call Trace.
The intercom line is not in use. See
The intercom line is sending or receiving one-way audio.
See Intercom Call.
The recipient pressed the intercom line to activate
two-way audio with the caller. See
(no signal) icon displays on the phone screen.
Shared Line.
Hold and Resume.
Call Forward.
Intercom Call.
Intercom Call.