Replicating The Setup - HP Rp5000 - Point of Sale System Management Manual

Desktop Management Guide

Replicating the Setup

✎
✎
Copying to Single Computer
Ä
✎
14
The following procedures give an administrator the ability to easily
copy one setup configuration to other computers of the same model.
This allows for faster, more consistent configuration of multiple
computers.
Both procedures require a diskette drive or a supported USB flash
media device, such as an HP Drive Key.
To collect and replicate BIOS settings on multiple computers, use
System Software Manager or HP Client Manger Software. For more
http://www.hp.com/go/EasyDeploy
information visit
CAUTION: A setup configuration is model-specific. File system
corruption may result if source and target computers are not the same
model. For example, do not copy the setup configuration from an
Ultra-Slim Desktop to a Microtower.
1. Select a setup configuration to copy. Turn off the computer. If
you are in Windows, click Start > Shut Down > Shut Down.
2. If you are using a USB flash media device, insert it now.
3. Turn on the computer.
4. As soon as the computer is turned on, press
monitor light turns green to enter Computer Setup. Press
bypass the title screen, if necessary.
F10
If you do not press
computer and again press
access the utility.
5. If you are using a a diskette, insert it now.
6. Click File > Replicated Setup > Save to Removable Media.
Follow the instructions on the screen to create the configuration
diskette or USB flash media device.
www.hp.com
at the appropriate time, you must restart the
F10
when the monitor light turns green to
Desktop Management Guide
.
F10
when the
Enter
to