HP Rp5000 - Point of Sale System Management Manual page 30

Desktop Management Guide
Security Features Overview (Continued)
Option
Embedded Security
(available on some models)
Device Security
Network Service Boot
(available on some models)
System IDs
✎
For more information about Computer Setup, see the Computer Setup (F10) Utility Guide on the
Documentation CD.
Support for security features may vary depending on the specific computer configuration.
26
Allows you to:
• Enable/disable the Embedded Security device.
• Reset the device to Factory Settings.
This feature is supported on some models only. See the HP
ProtectTools Security Manager Guide at
more information.
Enables/disables serial ports, parallel port, front USB ports,
system audio, network controllers (some models), MultiBay
devices (some models), and SCSI controllers (some models).
Enables/disables the computer's ability to boot from an
operating system installed on a network server. (Feature
available on NIC models only; the network controller must
reside on the PCI bus or be embedded on the system board.)
Allows you to set:
• Asset tag (18-byte identifier) and ownership Tag (80-byte
identifier displayed during POST).
• Chassis serial number or Universal Unique Identifier
(UUID) number. The UUID can only be updated if the
current chassis serial number is invalid. (These ID
numbers are normally set in the factory and are used to
uniquely identify the system.)
Keyboard locale setting (for example, English or German) for
System ID entry.
www.hp.com
Description
www.hp.com
Desktop Management Guide
for