15.3 Print settings
According to the requirements of GLP procedures, it is possible use an external
printer to produce print-outs from the gauge including text information.
USER's MENU
1. Applications
2. Units
3. Configuration
4. Calibration
5. Exit
CONFIGURATION
1. Speed of measurement
2. Auto-reset
3. Print settings
4. RS-232C settings
PRINT SETTINGS
Heading
Date
Time
ID1>
ID2>
ID3>
Number
PRINT SETTINGS
Heading
Date
Time
ABCD
ID2
ID3
↑
↓
OPERATION MANUAL
→
ENTER
↓
↑
ENTER
Use the navigation keys and
to select
ENTER
Print settings
the suitable print components.
– text strings (up to
ID1, ID2, ID2
20 characters) forming the lines of
the print-out, entered using the
gauge's navigation keys.
To enter the characters, select
and press →. The
using
ENTER
characters are entered using the
navigation keys ↑ and ↓. To move
the cursor to the consecutive
positions, use
confirm the entered string, press
. To delete a character,
ENTER
enter space.
23
and
ID
← and →. To