Table of Contents
Advertisement
10
10. Description of measurement methods
The gauge can be used to measure pressure and pull forces. In addition, when
mounted properly, it can be used as suspension scales to measure the mass.
10.1 Measuring actual and peak value of a pressure/pull force
Measuring pressure force
RESETTING
_ _ _ _ _ _
CONTINUOUS MEASUREMENT
-
-
PEAK MEASUREMENT
-
-
OPERATION MANUAL
Measuring pull force
Before starting the measurement,
choose a suitable measurement tip,
screw it to the gauge plunger and
reset the gauge in the operating
position, e.g. horizontal position
(laying the gauge on a table). The
resetting process starts automatically
after turning on the gauge or by
pressing the
To
indicate the force direction using an
arrow in the display's lower bar
0.00N
section and "+" (pressure) or "-" (pull
force) symbol.
+
To change the measurement from the
actual
measurement) to the maximum value
(peak measurement), use the
key.
When measuring a force whose
0.10N
direction
indicates the value of the force
+
exerted in the direction in which the
maximum value was last exceeded.
→T(0)←
key.
perform
the
measurement,
value
changes,
(continuous
PEAK
the
gauge
Advertisement
Table of Contents
