Mounting The Chuck - HBS A 22 Operating Manual

Studs with internal thread (ID)
Shear connectors (SD)
Spitzenform A
10.1

Mounting the Chuck

©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
Stud
dimension
Ø d Ø d Chuck Depth for
2 1
stud in mm
16 M10 83-50-016 15
Stud
dimension
Ø d Ø d Chuck Depth for
1 5
stud in mm
16 32 83-53-019 12
19 32 83-53-019 12
22 35 83-53-022 12
‹ Screw the chuck on the thread socket of the welding
gun.
‹ Tighten the chuck firmly with a double open ended
wrench AF 14/17 or AF 19/22 (accessory).
10 Preparing the Stud Welding Gun
Ceramic Suitable
ferrule grip leg assembly
80-31-262 93-40-040
Ceramic ferrule grip Suitable
leg assembly
80-30-219
93-40-041 /
80-30-219
93-40-074
80-30-222
23