Mounting The Chuck - HBS C 06-3 Operating Manual

for CD Insulation nails
for CD flat connection and double flat connection
10.2

Mounting the Chuck

The stud welding gun is now ready for use.
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
Stud dimension
Ø Length in mm
2 mm up to 155 mm
3 mm up to 155 mm
2,7 mm up to 155 mm
Dimension
6.3 mm
‹ Loosen the retaining nut on the piston of the welding
gun.
‹ Stick the chuck into the piston up to the stop block.
‹ Tighten the retaining nut again with the 17 mm socket
wrench.
‹ When doing so, make sure the bellows are correctly
positioned.
10 Preparing the Welding Gun
Chuck
82-50-020
82-50-030
82-50-027
Chuck
82-50-050
21