10 Preparing the Stud Welding Gun
10.2
Mounting the Leg Assembly
1
2
24
1 - Wing screw
Loosen the wing screw (1).
2 - Tripod leg
Now attach the leg assembly to the stud welding gun.
Clamp the tripod legs (2) with the wing screw (1).
1
Put the welding element up to the stop into the chuck.
Attention:
The welding element must firmly sit in the chuck,
otherwise welding element and chuck would burn.
Place the ceramic ferrule grip into the foot piece.
Clamp the ceramic ferrule grip with an allen key 3 mm
(accessory).
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer