Table of Contents
Advertisement
10.1
Mounting the Chuck
ARC chuck
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
10 Preparing the Stud Welding Gun
‹ Tighten the retaining nut with the 14/17 mm double
open-ended wrench.
‹ You thereby simultaneously tighten the chuck adaptor.
‹ Screw the chuck onto the adaptor.
‹ Secure the adaptor with a 17 mm double open-ended
wrench.
‹ Tighten the chuck with a 14 mm double open-ended
wrench.
Damage through twisting
‹ Never tighten the chuck if the adap-
tor is not held with a second double
open-ended wrench!
The interior units or the basic shell could
otherwise twist and be damaged.
19
Advertisement
Table of Contents
