Setting The Insertion Depth (Protrusion) - HBS A 22 Operating Manual

Setting the Insertion Depth (Protrusion)

The insertion depth characterizes the overlap size which would be achieved by
welding element and base material with seated welding gun before welding. This
overlap provides the melt for forming the weld collar.
E
E = Insertion depth for
welding elements with conical face
‹ Loosen the wing screw at the welding gun and adjust the insertion depth (see table
under point 10.3).
Insertion depth X
‹ Clamp the triopd legs with the wing screw.
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
10 Preparing the Stud Welding Gun
E
E = Insertion depth for
welding elements with plane face
29