Inspection And Tests - HBS A 22 Operating Manual

13 Maintenance and Care
13.2

Inspection and Tests

‹ Inspect the chuck before every use.
‹ Replace the chuck if you discover burning marks on the welding element and/or
on the chuck.
‹ Work here in accordance with point 10.1 „Mounting the chuck" in this manual.
‹ Before every use, inspect the bellows on the front part of the stud welding gun for
proper seating and/or damage.
‹ Never work with damaged or incorrectly seated bellows.
This will contribute to a long service life of your stud welding gun.
‹ Inform your dealer or maintenance department if you discover any dama-
ge.
‹ Before every use, check that the type designations and adjustment aids on the
stud welding gun are still legible.
‹ Clean the type plates in the event of soiling.
‹ Replace any type plates that are damaged or no longer legible.
36 ©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer