Cisco 7935 System Manual page 48

Phone Configuration Checklist
Phone Configuration Checklist
Table 40-6 Phone Configuration Checklist
Configuration Steps
Step 1 Gather the following information about the phone:
• Model
MAC address
•
Physical location of the phone
•
• Cisco CallManager user to associate with the phone
Partition, calling search space, and location
•
information, if used
Number of lines and associated DNs to assign to the
•
phone
Step 2
Add and configure the phone.
Step 3
Add and configure lines (DNs) on the phone. You can also
configure phone features such as call park, call forward,
and call pickup.
Step 4 Configure speed-dial buttons.
You can configure speed-dial buttons for phones if you
want to provide speed-dial buttons for users or if you are
configuring phones that do not have a specific user who is
assigned to them. Users can change the speed-dial
settings on their phones by using Cisco IP Phone User
Options.
Cisco CallManager System Guide
40-48
Table 40-6 provides steps to manually configure a phone in Cisco CallManager
Administration. If you are using auto-registration, Cisco CallManager adds the
phone and automatically assigns the directory number.
Chapter 40 Cisco IP Phones
Procedures and Related Topics
Phone Search, page 40-40
Adding a Phone,
Cisco CallManager
Administration Guide
Adding a Directory Number,
Cisco CallManager
Administration Guide
Configuring Speed-Dial
Buttons, Cisco CallManager
Administration Guide
OL-7135-01