H.323 Clients And Cti Ports - Cisco 7935 System Manual

H.323 Clients and CTI Ports

H.323 Clients and CTI Ports
Note
Cisco CallManager System Guide
40-10
Table 40-1 Supported Cisco IP Phones and Features (continued)
Cisco IP Phone Model
Cisco IP Phone 30 VIP The Cisco IP Phone model 30 VIP offers many of the
Cisco CallManager Administration enables you to configure software-based
devices such as H.323 clients and CTI ports. Software-based Cisco CallManager
applications such as Cisco SoftPhone, Cisco AutoAttendant, and Cisco IP
Interactive Voice Response (IVR) use CTI ports that are virtual devices.
H.323 clients include Microsoft NetMeeting devices.
You configure H.323 clients and CTI ports through the Phone Configuration
window in Cisco CallManager Administration like you do phones, but they often
require fewer configuration settings.
Cisco recommends that you do not configure CTI ports or devices that use TAPI
applications in a line group.
For information on H.323 clients and shared line appearances, see the
Line Appearance" section on page
Description
same features as PBX or POTS telephones. This IP
phone includes the following features:
26 programmable line and feature buttons
•
An LED that is associated with each of the 26
•
feature and line buttons to indicate feature and line
status
A two-line LCD for displaying date and time,
•
calling party name, calling party number, and
digits dialed
An internal, two-way speakerphone with
•
microphone mute
Dedicated feature buttons for Transfer, Hold, and
•
Redial
40-26.
Chapter 40 Cisco IP Phones
"Shared
OL-7135-01