Table of Contents
Advertisement
XF
eXtendo®
Thermal Printer Family
4.3 Mounting the Printer
In the standard version the eXtendo® XF printer is built with three quick-fit hubs for sliding and
locking in key holes. The quick-fit hubs can be removed leaving 4x M3 threads for mounting.
See the dimensional drawings for details.
Alternatively, the printer can be mounted using the optional mounting brackets. These brackets are
fixed to the printer with the existing screws on the sides of the printer chassis. If you order the
mounting bracket as an accessory, just remove the four screws on the printer sides and fix the
bracket with the same screws again. See the dimensional drawings for details.
Part No. D-684-399
Bottom View
Mod. No. 4 120322 Eli
page 17 of 35
Advertisement
Table of Contents
