www.ti.com
Figure 3-3
shows the terminal and pin locations on the EVM.
USB2ANY
Figure 3-3. Terminal and Pin Locations for the AFE881H1EVM
3.5 Connecting the USB2ANY
To connect the EVM board and the USB2ANY Interface Adapter together, firmly slide the cable ends of the
30-pin ribbon cable into the USB2ANY Interface Adapter and the AFE881H1EVM, as shown in
sure that the connectors are completely pushed together. Loose connections between the USB2ANY and the
EVM may cause intermittent operation.
SLAU858 – NOVEMBER 2021
Submit Document Feedback
GND
PVDD
Power Terminals
(Optional)
VDD Connection
for low supplies
IOVDD
Connect
REF EN
UARTIN
AFE881H1
SPI
UART
USB2ANY
Figure 3-4. USB2ANY Connection to the AFE881H1EVM
Copyright © 2021 Texas Instruments Incorporated
IOVDD
External
Reference
Power from
USB2ANY
(Default)
RX Filter
INF SEL
POL_SEL
VOUT Load
AIN
VOUT
CLKOUT
Connections
AFE881H1EVM
EVM Hardware Overview
MOD OUT
RX_IN/
MOD IN
Figure
3-4. Make
AFE881H1 Evaluation Module
9