Figure 2-2. Usb2Any Explorer - Texas Instruments TLC6A598 User Manual

www.ti.com
Connect the USB2ANY with Edge cable to J5 and connect USB2ANY to the PC with USB cable.
With above setup and connections completed, turn on the power supply 1 and 2. Then open the USB2ANY
Explorer Software and the software will show as
Click the 'Select Interface' button and choose the 'GPIO' and 'SPI' as
SLIU023 – JUNE 2021
Submit Document Feedback
Figure 2-2.

Figure 2-2. USB2ANY Explorer

TLC6A598 Power Logic 8-Bit Shift Register Evaluation Module
Copyright © 2021 Texas Instruments Incorporated
Figure 2-3 and click the 'Close' button.
Test Setup
5