Launching The Software; Figure 4-2. Launching The Afe881H1Evm Gui; Figure 4-3. Afe881H1Evm Gui At Launch; Figure 4-4. Usb2Any Digital Controller Connection - Texas Instruments AFE881H1 User Manual

Software Overview

4.2 Launching the Software

After installation, a shortcut to launch the GUI can be found in the Start menu. If installed in the default directory,
the AFE881H1EVM software can also be launched by navigating to the Texas Instruments folder in the Program
Files (x86) directory, as Figure 4-2
Figure 4-3 shows the GUI after launch. If the USB2ANY controller is not connected to the PC when the software
is launched, the GUI defaults to demo mode.
the hardware connection status: DEMO MODE or CONNECTED. After the USB2ANY controller is properly
connected to the PC, close and reopen the AFE881H1EVM software to detect the device.
12 AFE881H1 Evaluation Module
shows.

Figure 4-2. Launching the AFE881H1EVM GUI

Figure 4-4

Figure 4-3. AFE881H1EVM GUI at Launch

Figure 4-4. USB2ANY Digital Controller Connection Status
Copyright © 2021 Texas Instruments Incorporated
illustrates the bottom-left corner of the GUI showing
www.ti.com
SLAU858 – NOVEMBER 2021
Submit Document Feedback