ELAN IP AMP
EL-IPD-PRE-MSI Standalone
The EL-IPD-PRE-MSI can be used in stand alone mode paired with external amplifiers to support up to 22 input
sources (6 digital, 16 mono/8 stereo analog RCA and one stereo 3 .5mm typically used as the doorbell input
from an ELAN System Controller) .
Each RCA analog input can be configured as left, right or as mono . Twelve line level outputs can be configured
as 12 mono or 6 stereo output zones or as subwoofer out . Each can be configured as left, right, mono or sub
out .
EL-IPD-PRE-MSI Dante
Adding the Dante
Network Audio Card (EL-IPD-NAC-EXT) allows for additional chassis to be used to add
TM
additional sources or zones to the system . Combine with the Multi-Zone Audio Matrix to add additional sources,
or use the EL-IPD-PRE-MSI for sources and add additional EL-IPD-AMP-EXT for audio zones .
EL-IPD-PRE-SSI - Local Audio Source
The EL-IPD-PRE-SSI Local Audio Source provides a way to deliver two channel PCM audio from a single
remote source to an ELAN Dante enabled Audio Matrix over an existing standard local area network . The EL-
IPD-PRE-SSI adds an additional source to the ELAN Dante enabled Audio Matrix .
EL-IPD-NAC-EXT - Dante Network Audio Card
The EL-IPD-NAC-EXT enables the ELAN IP amplifiers and pre-amplifiers to be linked in order to share sources
and/or audio zones .
The EL-IPD-NAC-EXT Network Audio Card is compatible with the EL-IPD-MTX-8CH Multi-Zone Audio Matrix
and the EL-IPD-PRE-MSI Multi-Zone Preamp Audio Matrix .
7