Multi-Zone Audio Matrix; El-Ipd-Mtx-8Ch Single Chassis; El-Ipd-Mtx-8Ch Dante - Elan EL-IPD-MTX-8CH Design Manual

Hide thumbs Also See for EL-IPD-MTX-8CH:
Table of Contents

Advertisement

ELAN IP AMP

Multi-Zone Audio Matrix

The Multi-Zone Audio Matrix can be used in a Single Chassis configuration or with other amplifiers and pre-
amps within the ELAN IP audio distribution family of products . This is accomplished by adding the optional
Dante™ Audio Networking Card .

EL-IPD-MTX-8CH Single Chassis

In Single Chassis Mode, the Multi-Zone Audio Matrix supports up to 13 input sources (4 digital, 8 mono/4
stereo analog RCA and one stereo 3 .5mm typically used as the doorbell input from an ELAN System Controller) .
Each RCA analog input can be configured as left, right or mono .
Eight speaker channels are available (up to four stereo zones or eight mono zones) . Four line level outputs can be
configured as four mono or two stereo output zones or as sub-woofer out . Each can be configured as left, right,
mono or Sub Out . In Single Chassis mode, the Multi-Zone Audio Matrix supports up to 12 individual audio zones .

EL-IPD-MTX-8CH Dante

Adding the Dante
Network Audio Card (EL-IPD-NAC-EXT) allows for additional ELAN Audio over IP devices to
TM
be used to add additional sources or zones to the system .
5

Advertisement

Table of Contents
loading

Table of Contents