Table of Contents
Advertisement
Choice of place to install the oven
4.2
The good, safe and long working
of the equipment also depends on
the place in which it is installed so it
is advisable to carefully evaluate
this before it is delivered.
Install the equipment in a dry
place which is easily accessible
both as regards its use and its
cleaning and maintenance. The
area around the equipment must be
free of encumbrances.
In particular it is necessary
to avoid obstructing the cooling apertures. (Figure 4.1).
The equipment must in any case be installed at least 2 cm from the
walls of the room and from other equipment.
Finally it is necessary to ensure that the temperature and relative
humidity of the place in which the equipment is installed must never
exceed the maximum and minimum values indicated in the specifications
section (see 3). In particular if the maximum temperature and relative
humidity are exceeded, the equipment may easily and unpredictably go out
of order or be damaged in its electrical parts, thus creating a dangerous
situation.
The Manufacturer cannot answer for damage caused by
ignoring these abovementioned norms as well as the information in
this manual.
Figure 4.1.Cooling openings
CITIZEN EP70
4. INSTALLATION
11
Advertisement
Table of Contents
