Table of Contents
Advertisement
If there are substantial deposit of grease or fat, remove them carefully
beforehand with a spatula.
Do not use abrasive detergents or corrosive materials as they could
dull the stainless steel and would quickly remove the aluminium-coated
steel's protective layer, causing it to become rusty in a short time.
Do not use jets of water as they could penetrate the switchboard and
damage to create a danger of electrocution and/or sudden ups of the
equipment.
Cleaning the external surface
7.4
Use a soft damp sponge to clean, if necessary with a light non abrasive
detergent, the external surfaces made of stainless steel and/or coated
steel.
Do not use abrasive detergents or corrosives as they could cause the
stainless steel and the coatings to become dull in the long term, and thus
cause the steel sheets to become rusty.
Do not use jets of water as they could penetrate the switchboard and
damage to create a danger of electrocution and/or sudden start ups of the
equipment.
CITIZEN EP70
7. CLEANING
21
Advertisement
Table of Contents
