Table of Contents
Advertisement
4. INSTALLATION
Moving the module
4.3
When unloading and moving the module when it is packed use a fork-lift
truck or transpallet which has a capacity at least equal to the weight of the
module and insert the forks into the space provided in the lower part of the
packing.
When moving the module which is not
packed insert the forks in the upper
chamber.
In any case, to avoid unforeseen
movements, take note of the position
of the centre of gravity (Figure 4.2.and
table 4.1.).
In addition, to avoid damage to
the module, insert some protective
material between the forks and the
module itself.
Take care that children do not play with the packaging
materials (e.g., plastic sheeting and Styrofoam): suffocation danger!
Electrical connection
4.4
Equipment is supplied with a cable for the electrical connection with
earth lead. In observance of the current safety norms it is compulsory to
connect the earth wire (yellow-green) to an equipotential system
whose efficiency must be properly checked against the norms
currently in force.
Before making any connections ensure that the characteristics of the
mains supply to which the equipment has to be connected, correspond to
12
CITIZEN EP70
single-chamber
CITIZEN EP70
double-chamber
Tab.4.1.Centre of gravity
CITIZEN EP70
Figure 4.2.Centre of gravity
a (mm)
b (mm)
495
435
495
435
c (mm)
175
295
Advertisement
Table of Contents
