Table of Contents
Advertisement
®
R&S
NRQ6
You can use the web user interface with all devices and operating systems,
including tablets and smart phones.
● Supported web browser:
– Mozilla Firefox 56 or later
– Google Chrome 61 or later
– Microsoft Internet Explorer 11 or later
– Microsoft Edge 40
Setup
1. Set up a LAN connection.
For an example, see
on page 19.
Note: Make sure to power the R&S NRQ6 with PoE+. See
requires PoE+"
2. Connect the R&S NRQ6 to the DUT as described in
to a
DUT",
on page 17.
To display the Web user interface
1. Open a supported web browser.
2. Enter the hostname of the R&S NRQ6 you want to connect to. See
ter 3.6.1.5, "Using
Example: If the hostname is nrq6-900045, enter http://nrq6-900045.
You can also use the IP address, see
address",
on page 24.
The main dialog of the web user interface opens. See also
Reloading the web browser page
After a firmware update or a reboot, you need to reload the web browser page.
► Press [F5].
Parameter description
The parameters of the web user interface are described together with background
information in the user manual.
Getting Started 1178.3705.02 ─ 08
Chapter 3.6.1, "Computer using a LAN
on page 33.
hostnames",
on page 23.
Browser-based user interface
Chapter 3.4, "Connecting
Chapter 3.6.1.6, "Assigning the IP
Operating concepts
connection",
"R&S NRQ6
Chap-
Figure
5-1.
40
Advertisement
Table of Contents
