Table of Contents
Advertisement
Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
The watch performs alignment of the hour
●
hand, minute hand, second hand, and 24-
hour hand automatically.
Using CASIO WATCHES to
Adjust Hand and Day
Indicator Alignment
If the watch is paired with a phone, you can
also use CASIO WATCHES to adjust hand
and day indicator positions.
Adjusting Hand and Day Indicator
l
Alignment
Watch Operation Guide 5665
Adjusting Hand and Day
Indicator Alignment
1.
Pull out the crown to the second click.
2.
Hold down (B) for at least six seconds until
the second hand points to 12 o'clock
twice. Release the button when the
second hand reaches 12 o'clock.
This will start auto alignment of the hour
hand, minute hand, second hand, and 24-
hour hand.
The second hand will point to 12 o'clock
●
once after about three seconds, and
then a second time after about six
seconds.
After auto alignment is complete, the
●
hands should be in the positions shown
below.
3.
Press (B).
The hour, minute, second and 24-hour
●
hands will move to the 11-minute
position.
When the 24-hour hand is in the vicinity
●
of 14:00, hold down (A) until the hour
hand, minute hand, and 24-hour hand
start to move. Confirm that the 24-hour
hand stops in the vicinity of 02:00.
24-hour hand
Minute hand
Hour hand
30
Crown
Second hand
4.
Press (B).
Confirm that the small hour and minute
hands, and the small 24-hour hand are all
stopped at 12 o'clock.
Small minute hand
Small hour hand
30
Small 24-hour hand
5.
If the small hour and minute hands, and
the small 24-hour hand are not at 12
o'clock, rotate the crown to align them with
12 o'clock.
6.
Press (B).
Confirm that the mode hand is stopped at
[Su], and check if the day is indicated
properly.
30
1
Mode hand
Day (Operation start day)
7.
If the mode hand and/or the day indicator
is out of alignment, rotate the crown to
move the mode hand to [Su] and the day
to the center of the indicator window.
The movement range of the mode hand
●
and day indicator is limited when you
rotate the crown. The maximum left-
right movement of the mode hand is 180
degrees in either direction. The day
indicator moves only slightly.
After the mode hand and day indicator
●
are in the positions you want, advance
to step 10 of this procedure. If you are
unable to make the adjustments you
want, go to step 8.
23
Advertisement
Table of Contents
