Operation Guide 5625 Before Getting Connecting with a Phone ● Alarm on/off setting H Started... Hold down (B) for at least 0.5 seconds until the In the Alarm Mode, the second hand second hand points to [C]. indicates if the alarm is enabled or This section provides an overview of the watch disabled.
Operation Guide 5625 Stopwatch Mode Alarm Mode Fast Forward/Fast Reverse ● ● ● The second hand, and the small hour and The small hour and minute hands indicate the Crown minute hands indicate the elapsed stopwatch alarm time. time. The second hand indicates the alarm enabled/ disabled setting.
Operation Guide 5625 Remaining Charge and Dead Battery Charging Time Guidelines Solar Charging ● ● You can determine if the charge level is low by The table below shows guidelines for This watch runs on power supplied from a checking the hand movement. Functions approximate charging times.
Level 1 to illuminate the display for about three power saving. seconds for viewing in the dark. When turned Your phone needs to have the CASIO “MR- ● on, illumination becomes gradually brighter G Connected” app installed to pair with the Also, leaving the watch in a dark location for and then gradually dimmer.
Operation Guide 5625 Appropriate Signal Reception Referring to the information below, configure Time Adjustment Using a the time setting in accordance with the method Location Time Signal that suits your own lifestyle. A time calibration signal can be received while the watch is near a window.
Operation Guide 5625 Time Calibration Signal Reception Auto Time Calibration Signal Manual Time Signal Receive Ranges Receive Important! Time calibration signal reception is supported An automatic time calibration signal receive in the areas shown below. operation is performed and the time and day A manual time calibration signal ●...
Operation Guide 5625 Signal Reception Precautions Adjusting the Time and Day Setting Using Watch Operations to ● Adjust the Time Setting When the watch is unable to adjust its time ● Loosen the crown and then pull it out to the in accordance with a calibration signal for second click.
Operation Guide 5625 Configuring the Summer Time Setting Checking the Last Time ● Rotate the crown to move the second (Home City) Adjustment Result hand to the desired setting for the year The watch’s current time setting can be one’s digit.
● phone. In Google Play or the App Store, search for the Auto Time Adjustment CASIO “MR-G Connected” app and install it Within 10 seconds after you perform the on your phone. operation in step 2, loosen the crown and Your watch can connect with your phone to then pull it out to the first click.
Operation Guide 5625 Configuring the Summer Time Setting Configuring World Time ● Note Settings 1. Y Tap the “MR-G Connected” icon. If the watch does not indicate the ● Specifying a World Time City with MR-G correct time even if it is able to connect 2.
Operation Guide 5625 Adjusting Hand and Day Note 1. X Hold down (C) for at least one second. Indicator Alignment This will cause the watch to enter the Auto time adjustment does not work for ● Calendar Mode. If the hands and/or day indicator are out of...
Operation Guide 5625 Changing the Home City Connection Important! Summer Time Setting Connecting with a Phone If you have problems establishing a ● Enter the Calendar Mode and then press ● Your watch can connect with a phone that is connection, it could mean that MR-G (B).
Operation Guide 5625 Selecting a Time Zone Configuring the Summer 3. X Hold down (B) for at least 10 seconds. Time Setting (Dual Time) This deletes the pairing information. The Use the procedure below to specify the time second hand will point to [C].
Operation Guide 5625 Stopwatch Timer Swapping the Home City Time and Dual Time The stopwatch measures elapsed time in units The timer counts down from a start time of one second up to 23 hours, 59 minutes, 59 specified by you. A beeper sounds when the In the Calendar Mode, you can swap your seconds (24 hours).
Operation Guide 5625 Adjusting Hand and Using the Timer Configuring Alarm Settings Day Indicator Enter the Timer Mode. Enter the Alarm Mode. Alignment Navigating Between Modes Navigating Between Modes Strong magnetism or impact can cause the Press (A) to start the countdown.
Operation Guide 5625 International Travel Note Press (C). When you enter another time zone, the watch Confirm that the mode hand is stopped at Leaving the crown pulled out for more will adjust its time setting to your current ●...
This section provides non-operational For information about phones that can Phone finder information you also need to know. Refer to connect with the watch, visit the CASIO Watch operation sounds the alert sound this information as required. website. of the phone.
Enable the watch’s Airplane Mode ● criminal offense. For details, visit the CASIO Using the Watch in a Medical Facility or Is the watch’s battery charged? Website. Aircraft Signal reception is not possible while https://world.casio.com/ce/BLE/...
Page 20
For information about supported phone Minimize movement of the watch and do The hour hand and/or minute hand may models, visit the CASIO Website. not perform any watch operation while a be out of alignment. Perform the https://world.casio.com/os_mobile/wat/ receive operation is in progress.
Page 21
Operation Guide 5625 I can’t reconnect the watch Phone-Watch Connection I can’t connect while my phone is in the Airplane Mode. and phone. Connection with the watch is not possible I can’t establish a connection while the phone’s Airplane Mode is enabled.
Page 22
Operation Guide 5625 Auto Time Adjustment by Hand Movement and Even if I hold down (B) for at least 0.5 seconds, the watch does not sync its Bluetooth Connection (Time Indications time setting with my phone. Adjustment) Connection with your phone is not possible while I don’t know what mode the watch is...
Page 23
Operation Guide 5625 The current time indicated by the watch is off by one hour or 30 minutes. The summer time setting is not correct. Select the correct setting. Selecting Your Home City’s Time Zone The hand and/or day indicator are not aligned correctly.