Checking The Last Time Adjustment Result - Casio 5665 Operation Manual

8.
Press (B).
This enables the month setting operation.
12
11 1
10
9
8
7 5
6
Month
9.
Rotate the crown to change the month.
10.
Press (B).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
30
Day
Changing the day setting will cause the
●
mode hand to rotate repeatedly.
Hand and Day Indicator Movement
l
11.
Rotate the crown to change the day.
To return to the hour and minute setting
●
operation, press (B).
12.
On a time signal at the top of a minute,
push the crown back in.
Watch Operation Guide 5665
Configuring the Summer Time Setting
●
(Home City)
If you are in an area that observes summer
time, you can also configure a summer time
setting.
2
Note
3
The initial factory default summer time
●
4
setting for all cities is [AT (AUTO)]. In
many cases, the [AT (AUTO)] setting
lets you use the watch without
switching between summer time and
standard time.
When performing a manual operation
●
to select a time zone for which there is
no city name displayed, use [STD] or
[DST] for the summer time setting.
1.
Pull out the crown to the second click.
The second hand will move to the city
code of the currently selected Home City.
2.
Press (B).
This enables the summer time setting
operation.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
3.
Rotate the crown to change the summer
time setting.
[AT (AUTO)]
●
The watch switches between standard
time and summer time automatically.
[STD]
●
The watch always indicates standard
time.
[DST]
●
The watch always indicates summer
time.
4.
Push the crown back in to its normal
position.
30
Crown
Summer time setting
Checking the Last Time
Adjustment Result
1.
Enter the World Time Mode or the
Stopwatch Mode with the stopwatch reset
to all zeros.
Navigating Between Modes
l
Measuring Elapsed Time
l
2.
Press (B).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
30
Note
Even if there was a successful time
●
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
19