Installing The Board - HP Net PC 20 Supplementary Manual

Accessories Guide
Installing Accessory Boards

Installing the Board

1 Switch off the display and computer, and disconnect the power
supply cables and any telecommunication cables.
2 Remove the computer's cover (described on page 9).
3 Select a free accessory board slot.
4 If you are installing an ISA accessory board, you may need to slide
the front chassis forward to allow access. (Refer to page 12).
5 Remove the screw and open the retaining bracket.
6 Remove the accessory board slot cover. Store it in a safe place.
26 English