Symbios Logic Scsi Configuration Utility; Default Settings You Can Change - HP Kayak XA Technical Reference Manual

Symbios Logic SCSI Configuration Utility

The Symbios Logic SCSI Configuration Utility lets you view and change the
default configuration for the host adapter and all SCSI devices connected to
it, or for individual SCSI devices. If, while using this utility, you accidentally
disable all the controllers, pressing
the memory test) lets you recover and configure settings.

Default Settings You Can Change

The following two tables show the configuration settings that can be
changed. The first table shows the global settings which impact the host
adapter and all SCSI devices connected to it. The second table shows the
device settings which apply to individual devices.
Settings for the Host Adapter and All Devices
SCAM Support
Parity Checking
Host Adapter SCSI ID
Scan Order
Settings for Individual SCSI Devices
Synchronous Transfer Rate (MB/sec)
Data Width
Disconnect
Read Write I/O Timeout (secs)
Scan for Devices at Boot Time
Scan for SCSI LUNs
Queue Tags
Symbios Logic SCSI Configuration Utility
during the power-on self test (after
Default Settings
On
Enabled
7
Low to High (0-Max)
Default Settings
40
16
On
10
Yes
Yes
Enabled
4 HP BIOS
77