Table of Contents
Advertisement
li n dab | w e s i m pl ify c on st r u ct i on
Installation instructions
20. Maintenance
20.1 User maintenance
Servicing involving the user is limited to periodically replacing
the filters. The filters must only be replaced when indicated on
the controller display (icon
The unit cannot be used without filters.
Always disconnect power before accessing the
unit.
• Open the front panel;
• Remove the caps (A);
• Extract the filters and replace them (B).
• Put all the components back in the opposite order
and reconnect power.
PLEASE NOTE: comply with the codes on the filters
and the type of unit connection used (standard or right
side).
Fig. 79
B
A
• Now it is possible to switch off the icon display.
• Go to the User Setting menu, press the "M"button.
• Use the TOUCH PAD
activation
.
• Press the confirm button
• The timer to change the filters has been reset .
).
Standard Configuration
F7
M5
Right Side Configuration
M5
F7
to select the icon of filter
.
Lindab reserves the right to make changes without prior notice
In case the filters need to be changed before the timer
deadline, it is possible to reset the countdown "
any moments by following the described procedure.
2022-01-28
RHR-CF
" at
51
Advertisement
Table of Contents
