Table of Contents
Advertisement
li n dab | w e s i m pl ify c on st r u ct i on
Installation instructions
15.3 Creation of the free weekly programmes
Programmes P5-P6-P7-P8
It is possible to create 4 weekly programs at will,
according to your habits and needs.
Proceed as follows:
1. Turn on the appliance at the ON/OFF key.
2. Press the ON/OFF and "M" Menu keys at the same time.
3. Use the TOUCH PAD to select the installer menu
.
Press enter to confirm
4. Select the " P " symbol and confirm
Now select the first free programme to be created from
among P5 - P6 - P7 or P8.
5. Once the programme number is defined, following
scheduling should be done:
• define the day
• define fan speed at the first time step, which
starts by default at 00:00.
Use the TOUCH PAD with the purpose to set 4 avail-able
speeds plus Party Mode speed.
Blades are displayed into fan icon accordingly.
• define hour of first time step end
• repeat procedure for next time step
• maximum number of time steps is 8
6. After programming the first day, press "M" to move to
the next day; it is possible to extend the programme
created for the first day to the other days of the week
(Xtend= extend):
Fig. 53
DAY
P
If you select "YES"the programme is automatically copied to
the other days of the week; if instead you select "no", you
can then use the TOUCH PAD to select a day and repeat
the programming process.
PLEASE NOTE: the daily hourly programme is set by
default to OFF.
.
+
-
Lindab reserves the right to make changes without prior notice
2022-01-28
Fig. 54
P
P
DAY
P
DAY
P
DAY
P
DAY
P
DAY
P
DAY
P
RHR-CF
+
-
+
-
+
-
+
-
+
-
+
-
+
-
35
Advertisement
Table of Contents
