Table of Contents
Advertisement
li n dab | w e s i m pl ify c on st r u ct i on
Installation instructions
19.5 Read menu
Fig. 77
This menu allows you to read some operating parameters
of the appliance.
With the controller "ON", press "M" and On/Off
simultaneously for 3 seconds.
Select the "rEAd" menu using the TOUCH PAD and confirm
by pressing "Enter".
Select the parameter to be read using the TOUCH PAD.
Once you have selected the parameter, the value will
appear on the display.
Press the"M" button once to return to parameter selection;
to exit the menu, press the "M" button 3 times.
T1
value of external air temperature probe T1
T2
value of intake air temperature probe T2
value of stale extracted air temperature
T3
probe T3
T4
value of exhaust air temperature probe T4
RD1
Fan voltage
RD2
fan rpm
RD3
Air flow rate automatically controlled by fans (*)
RD4
Temperature report
RH
detected humidity value (*)
RHs
detected dynamic humidity set point value (*)
CO2
value of CO 2 detected (*)
Preheating
resistance power output (*)
Number of operating hours of the appliance
Cnt
(fan hours rpm > 0)
Configuration dip switch power board
DIP
Time remaining until filter replacement
(in days)
* Available only if the functions feature air quality sensors
DESCRIPTION
Lindab reserves the right to make changes without prior notice
Fig. 78
Dip n°
2022-01-28
RHR-CF
T1
°C
T2
°C
°C
T3
°C
T4
=
=
1234
5678
49
Advertisement
Table of Contents
